Whole House Systems
  • Drinking Water Systems
  • Replacement Filters
  • verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Tier1

    TIER1-P1-10

    10 X 2.5 Polypropylene Replacement Filter by Tier1 (1 micron)

    • Bonded Polypropylene filter media

    • Brings you cleaner water along with an easy installation

    • 30 day 100% satisfaction guarantee

    • Fits many common 10 x 2.5-inch housings

    format_list_bulleted Features & Specs
    Package Qty: 1
    Manufacturer: Tier1
    Manufacturer's Id: P1-10
    UPC: 799932614644
    Actual Size (in): 9-3/4 inches (length) x 2-1/2 inches (outside diameter)
    Media: Melt Blown Polypropylene
    Primary Filter Media: Polypropylene
    Operating Temperature (°F): 40 - 145
    Operating Temperature (°C): 4.4 - 62.8
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Brand: Tier1
    Advertised Size: 10 x 2-1/2
    Length (in): 9.75 in
    Outside Diameter (in): 2.5 in
    Media Type: Sediment Filter
    Country of Origin: China
    Micron Rating Nominal: 1
    Flow Rate (gpm): 5.0
    description Instructions
    1. Turn off water supply. Press red pressure-relief button (if present).
    2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
    3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
    4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
    5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
    6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
    7. Insert new filter cartridge.
    8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
    9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.
    warning_amber Contaminants Reduced
  • Particulates
  • Sediment
  • filter_alt Filter Life
    Filter Life (months): 3 months
    verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product

    The Pentek P1 comparable filter by Tier1 is an ideal solution for a variety of filtration applications. The Tier P1-10 Bonded Polypropylene filter effectively reduces sediment and fine dirt down to 1 micron. Don't let impurities plague your water. Confront your filtration challenges head on; order today!


    TIER1-P1-10   is comparable with the following part number(s)

    • 34360
    • 93113
    • 176376
    • 255690
    • 1193113
    • 1227865-V
    • 155225-43
    • 255690-43
    • IF-SP-1001
    • P1
    • PENTEK-P1
    • PS1-10C
    • PX01-9-78
    • VX01-978
    {"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"left","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"left","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}