Contact Us | 1-888-801-7873 |

Apply For Wholesale Pricing HERE

Menu
0

Contact Us | 1-888-801-7873 |

Apply For Wholesale Pricing HERE

0

Your Cart is Empty

Whole House Systems
  • Whole House Systems
  • Water Softeners
  • UltraViolet Filtration
  • Whole House System Replacement Filters
    • Drinking Water Systems
  • Reverse Osmosis
  • Gravity & Countertop
  • Undersink & Inline
  • Drinking Water Systems Replacement Filters
  • Parts & Components
    • Replacement Filters
  • Refrigerator Filters
  • Whole House Filters
  • UV Lamps & Sleeves
  • Pool Filters
  • Air Filters
    • 10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)
    verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Tier1

    TIER1-P5-10BB

    10 X 4.5 Spun Wound Polypropylene Replacement Filter by Tier1 (5 micron)

    $7.87
    Fits most stand housings built for 10-inch x 4.5 inch filter cartridges

    • Ships fast!

    • Reduces contaminants down to 5 micron

    • Made from polypropylene filter media

    • Standardized size for convenience and compatibility

    format_list_bulleted Features & Specs
    Package Qty: 1
    Manufacturer: Tier1
    Manufacturer's Id: P5-10BB
    UPC: 799932624933
    Actual Size (in): 9 7/8 inches (length) x 4 1/4 inches (outside diameter)
    Media: Spun Wound Polypropylene
    Primary Filter Media: Polypropylene
    Operating Temperature (°F): 40 - 145
    Operating Temperature (°C): 4.4 - 62.8
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    Brand: Tier1
    Advertised Size: 10 x 4-1/2
    Depth (in): 4.25 in
    Length (in): 9.88 in
    Width (in): 4.25 in
    Media Type: Sediment Filter
    UPC's For Search: 10051678357436 | 051678357439 | 799932624933
    Country of Origin: China
    Micron Rating Nominal: 5
    Flow Rate (gpm): 10.0
    Includes: One 10 x 4.5 inch Tier1 Spun Wound Polypropylene Filter
    description Instructions
    1. Turn off water supply. Press red pressure-relief button (if present)
    2. Unscrew housing. Remove large o-ring, wipe clean and set aside
    3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
    4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
    5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
    6. NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
    7. Insert new filter cartridge
    8. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
    9. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
    warning_amber Contaminants Reduced
  • Dirt Sand Sediment
  • Particulates
  • Sand
  • Sediment
  • Silt
    • filter_alt Filter Life
    Filter Life (months): 6 months
    verified_user Warranty Info
    Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
    compare_arrows

    TIER1-P5-10BB Filter Advantages

    The Pentek DGD-5005 comparable whole house sediment water filter by Tier1 is a 5 micron polypropylene filter that goes to work immediately reducing the contaminants that plague your drinking water. Contaminants reduced by this filter include dirt, particles, sand, sediment, and silt. The P5-10BB by Tier fits most standard 10-inch x 4.5-inch housings, making it an ideal solution for numerous settings. With simple installation and replacement steps you can replace your existing cartridge as needed when ever you need. Order today!

    Polypropylene Filter Cartridge

    Polypropylene media inhibits bacterial growth making it an ideal option for both municipal and well water applications. These filters are effective at capturing contaminants such as sand, sediment, silt, and more. Unlike carbon filter cartridges you wont have to worry about small carbon fines potentially spilling into your water, while still enjoying the benefits of filtered water throughout your home. Polypropylene filters are great for whole house water filtration and can be used as effective pre-filters for whole house or point of use systems.

    Standardized Filter Sizing

    The 10 X 4.5 spun wound polypropylene replacement filter by Tier1 is built to fit 10-inch x 4.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 10 x 4.5 inch filters. The P5-10BB goes to work immediately providing cleaner, fresher water for up to six months. Enjoy cleaner better water with your whole house replacement filter today.


    TIER1-P5-10BB   is comparable with the following part number(s)

    • 5005
    • 355217-43
    • DGD5005
    • DGD-5005
    • P510BB
    • PENTEK-DGD-5005
    • WDGD 5005
    • WDGD-5005
    • 155357-43
    • 155357-43
    • 355217-43
    • DGD-5005
    • P5-10BB
    • Pentek-DGD-5005
    • TIER1-P5-10BB
    • WDGD
    • WDGD-5005

    TIER1-P5-10BB   fits the following model number(s)

    • CULLIGAN-HD-950
    • PENTEK-153029
    • WHKF-DWHBB
    • WHKFDWHBB
     

    Customer also purchased

    {"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":38,"triggerOffsetY":100,"mobile":{"triggerSize":"small","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":20,"triggerOffsetY":10,"triggerRadius":"50%"}}